Showerguard™ Refurb kit (Purple pack)

This is to refurbish an existing shower

Kit Contents

  • 1 x 150ml Signo Limescale remover
  • 1 x 30ml Showerguard™
  • 1 x 30ml Pre-clean
  • 1 x Pre-clean application cloth (white)
  • 1 x Showerguard™ application cloth (blue)
  • Gloves

Covers approximately 3-4m 2

Basic application information

For more details please see the packaging insert.
  1. To refurbish existing showers and bathroom furniture firstly thoroughly clean all the area of built up limescale and soap residues with Signo Limescale remover in the pack, this needs to be applied and left for 20 minutes to work. Rinse thoroughly using a cloth (not provide) to remove stubborn marks.
  2. Once the surface is dry and free from limescale and soap residue, prepare the surface by using the Pre-clean solution and the white cloth.
  3. Coat with Showerguard™ when the surface is free from streaks. Using the blue cloth ensure even and complete coverage of the surface.
  4. The surface can be touched immediately after coating, but it will be fully cured after 24hrs when the shower can be used
  5. Ongoing cleaning will be easier and can be done with any suitable non-abrasive household glass-cleaning product, do not use abrasive scrubbing equipment for cleaning.

Helpful hint – when applying the Pre clean and Showerguard™ divide the surface into small areas to minimise rapid evaporation of the product

View the full range

ShowerguardRefurb New Kit

Want to know more or place an order enquiry? Call us on +44 (0) 1691 654282 or send us a message below